Downloads

 

Firmware

Version 2.4

The latest fixture firmware for getting the most from your CRAVE System.

This update increases wifi connection resiliency and recovery after interrupts, and improved communication speed and reliability. If you are running over a G/N wifi network, use the “G/N” version. If you are running on a B/G/N network due to weak connectivity or a dated wifi router, use the “B/G/N” version.

To take full advantage of the new capabilities, you will need to install GUI version 1.1.1 or later.

Firmware update instructions:

  1. If the screen shows the raw hex when you select download, right-click and select Save As – this will allow you to save the HEX file where you wish (this is typically a Chrome issue).
  2. If you are running the original (< ver. 2.0) firmware, update the firmware before you update the User Interface. Connect to your fixture using the USB cable provided. Proceed directly to the Advanced tab to update the firmware.
  3. Heads up – This firmware update contains major communication changes. If updating your fixture fails the first time, allow the failure to occur, close the GUI, re-open, and try again. It will take the second time. Do not simply hit “Update Firmware” again, as this can cause a communication error. This is a one-off change, and this caution will not be necessary for future updates.
  4. Once the firmware has updated successfully, unplug the fixture, remove the prior GUI from your computer and update to the new interface. No programs you have made or the wireless configuration you have entered into the fixture will be affected.

Feb 2017
AcroOptics Fixture Firmware G/N

Aug 2016
AcroOptics Fixture Firmware B/G/N

Click Here For Fixture Interface for PC

Ver. 1.1.1

The latest PC fixture interface software (GUI) for creating custom programs to run your CRAVE System.

Version 1.1.1 features:

  • Simplified graphics for the dashboard.
  • PAR plotting for your fixture type over the course of your program by color channel – know exactly how your livestock is illuminated.
  • New full-custom mode allows for independent up and down ramps for each of two timers per color channel, per day, up to 365 days.

Feb 2017
GUI for controlling a fixture. For first-time installations, it will also install the fixture driver, WinpCap and Visual Studio Runtime


Click Here For Fixture Interface for OSX

Ver. 1.1.1
The latest OSX fixture interface software (GUI) for creating custom programs to run your CRAVE System.

Version 1.1.1 features:

  • Simplified graphics for the dashboard.
  • PAR plotting for your fixture type over the course of your program by color channel – know exactly how your livestock is illuminated.
  • New full-custom mode allows for independent up and down ramps for each of two timers per color channel, per day, up to 365 days.

Oct 2016
GUI for controlling the fixture. It will install also the fixture driver and NMAP

Leave a Reply